High-Temperature Resistant Masking Tape

• Product features: strong adhesion, not easy to break, easy to tear, tightly wound without gaps
• Optional adhesive - easy to stick and tear - no residual adhesive left long and wide
• Resistant to 120-150°C
• High-temperature resistance, good resistance to chemical solvents, no residual adhesive.
• High adhesion, soft, and easy to tear and write.

1. The masking tape can be written on directly with a pen or printed with a pin printer for easy marking.
2. Scope of application: automobile painting, daily life handicrafts, etc.

• Large selection of standard and specialty heat-resistant high-temperature masking tapes
• Manufactured with high-quality, low-tack, easy-to-remove adhesives to ensure consistency
• Each tape is available in a wide range of sizes, roll lengths and widths
• Offers a wide range of excellent resistance properties
• Each high-temperature masking tape has a variety of uses, including
• For masking during powder coating: green polyester film tape
• For covering heating elements during 3D printing: polyimide and Kapton film tapes
• For protecting applications during sandblasting or shotblasting: Sandblast Glass Fabric Tape

1. The tape should be stored in a warehouse, protected from sun and rain, and kept dry and tidy.
2. The tape should be placed in rolls, not folded, and should be rotated every few days in storage.
3. Types and specifications should be used according to the needs and specific conditions, and should be reasonably selected. Such as: high viscosity, medium viscosity, high temperature, medium temperature
4. The tape should not bend or creep to keep the pulley sensitive and the tension should be appropriate.
5. Cleanliness is the basic condition for the belt to run well. The outer material of the tape will affect the viscosity, eccentricity, poor tension and even breakage of the tape.
6. If the belt is found to be damaged early in the process, the cause should be identified in time.

The cause of warping of masking tape

1. Insufficient viscosity of the glue
   Solution: Choose high-viscosity materials.
2. Label machine pressure is insufficient
   Solution: Glue viscosity problem, or choose the right glue viscosity material.
3. The surface material of the label
   It is necessary to consider whether the object to be marked is flat or curved, whether it is large or small in diameter, etc. These factors are related to the selection of materials. You can choose soft materials, such as PE, and PVC, and you can also choose hard materials, such as PET, BOPP, PS, and other materials with higher hardness.